Shop headings: New Spares | Used Spares | Accessories | Brands
Replacement top box to rear luggage rack lock for Hepco and Becker Junior top boxes / top cases. This is the lock at the base of the top box which attaches it to the luggage rack
Supplied with key, rivets, lock plate and fitting instructions
1 in stock
£37.00
INC VAT
£30.83 EX VAT
Brilliant chrome, aluminium and metal polish.
Make your Guzzi gleam.
1 in stock
£6.50
INC VAT
£5.42 EX VAT
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£205.00
INC VAT
£170.83 EX VAT
6 pin male block connector, used for main loom connections. See ELA30001 for female 6 block connector.
1 in stock
200073020
£3.60
INC VAT
£3.00 EX VAT
Five piece decal set, gold lettering. Three larger decals, two smaller decals
1 in stock
£10.50
INC VAT
£8.75 EX VAT
Pair of engine crash bars finished in bright Italian chrome. The heads and rocker covers are vulnerable on these bikes and can be badly damaged by even a minor accident, replacement cost can be more than £1000 so protect your bike with these bars.
Supplied with fitting hardware and black bracket, this crashbar has been specially developed for the second generation V7. See our technical documents section for installation instructions. Engine bars - essential protection for your bike.
1 in stock
£175.00
INC VAT
£145.83 EX VAT
The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.
Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:
1 in stock
£33.00
INC VAT
£27.50 EX VAT
Chrome bar end mirror with a large round head and adjustable arm. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.
Can be fitted on either left or right hand side of handlebars. Shown here fitted to a handlebar which is not included
1 in stock
£30.90
INC VAT
£25.75 EX VAT
High performance Quadflex maintenance free Motobatt 12 volt 14Ah battery. Quadflex technology means you have two positive and two negative threaded terminals allowing maximum flexibility when installing. Motobatt absorbed gel matting batteries feature the latest absorbent glass mat technology. This offers increased lifespan, higher vibration resistance and electrical performance. This battery is also leak, vibration and spill proof if installed correctly.
NB this battery is physically smaller than the OE battery fitted to the Quotas
200 CCA.
4 x M6 terminals
Supplied charged and ready to fit with terminal brackets and button head screws.
NB This battery must not be trickle charged or charged using a traditional manual charger, AGM batteries require a smart charger - we recommend ACA96000
For more information on charging AGM batteries see these FAQ's.
If parking your bike up for several weeks we recommend disconnecting one battery terminal to prevent battery drain, this should ensure your bike will start once you are ready to use it again. Replaces YTX12BS, YTX14BS, YTX14LBS, KMX14BS, YTX15LBS and Odyssey PC545. Replaces Guzzi ref. 638733, this battery is for small twins with a single throttle body
One year warranty on all our Motobatt batteries
Also available at the same price in black by special order - call 01484 841395 to order. If you need more performance than a standard AGM battery offers see hybrid battery ELA59015 which ouputs 330 CCA for starting the highest performance twins
Please note this part CANNOT be posted outside of the UK mainland area
1 in stock
638733 MG638733
£86.00
INC VAT
£71.67 EX VAT
Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder
Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'
1 in stock
£24.50
INC VAT
£20.42 EX VAT